. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Monday 29 July 2019

Maxi tiered rayon dress


Another free pattern day! Today, I am bringing this beautiful and easy sewing dress created with my Poppy Memories print in Rayon from my Floralish fabric collection.


This rayon dress pattern is great for hot summer days, perfect as a beach cover up and is very attractive, but also easy sewing pattern! It's actually one size fits all, as you can manage it's fit with ties and make it yours ;)

As with all Art gallery fabrics their gorgeous rayons are very soft and have an amazing drape, they are 54-56"wide, which will provide this amazing flowy effect!
So, let's get started!!!

Needed supplies:

3 - 3 1/2 yds of cotton voile or rayon fabric or other quilting cotton 
(I used a bit more than three yards of my poppy memories print in rayon)
*If you have 3 yds of fabric, you can make the tier to be shorter, like 8" instead of 10"
sewing machine(serger is optional, but preferred)
(if you don't have the serger just use a straight stitch and than do a zigzag stitch on the edges to keep the edges from fraying) 
scissors and/or rotary cutter
threadneedle (size 9 sharp needle is the best choice for rayon sewing)
iron and pins or clips
- bias binding tool (25 mm)- optional, but very helpful and highly recommended 


WOF-width of the fabric (this rayon is 54-56" wide)



*The armpit parts (both front and back pieces can be slightly adjusted to fit better your body- they could be cut from 6"-8" inches from the sides toward the center of the fabric, as shown above, according to how you are prefer the dress to fit your body).

1. Cut and prepare all the pieces, as shown above:

- 1x front piece-cut from the 44" x WOF
- 1x back piece-cut from the 36" x WOF
- 3x tier strips- 10" WOF each
- 2x ties strips- 1" x WOF each
(the ties for this project and this type of fabric can be cut normally-no need to cut them on bias)

front:

back:



2. Place the front and back pieces together, right sides inside, pin (or clip) and sew both sides of the dress closed. You can top stitch the side seams, if preferred, which will stabilize seams.
*I serged the armpit seams before sewing the side seams, because of fraying, but this is optional and can be done after. 


3. Gather the neckline: front and back side.

There are many techniques for gathering-ruffling fabric. You can use whatever method you prefer: with the ruffler foot, with the gathering foot, with the sewing machine using 2 basting stitches and pulling the fabric or with your serger. I usually gather cotton fabrics using my serger. When the fabrics are light weight as voile and rayon, you don't even need the ruffler foot - just put the differential and needle feed to be as high as possible (avoiding breaking the thread-if too high) . For the rayon, as it is light weight fabric, it's also very easy to use the sewing machine. Just adjust the tension of the top thread to almost maximum, and slightly loose the tension on the bobbin thread. Don't forget to adjust all the tensions to normal once you are done with ruffling!:)


4. Pin and sew the armpit seams closed, as preferred.


5. Make the ties with both 1" strips. 
To make them, you can either use the bias binding tool (like I did) and than press it lengthwise or without this useful tool, you can fold the strip in half lengthwise and iron it, then open and press both sides toward the center crease, press center crease close again.



5. Also, at this point, you can sew the tier strips together. Place 2 strips right sides together and sew shorter sides together just on one side, than add the 3rd strip sewing shorter sides together. 


6. Gather (ruffle) accordingly just one of the longer edges of the tier to obtain the same width of the main dress piece (approx. 108"). Finish the other edge with serger or zig zag seam and top stitch it.


7. Pin (or clip) and sew the tier to the bottom edge of the dress. Top stitch the bottom seam.


8. You have 2 ties: one is for the front and one for the back of the dress.
To finish the necklines (both-front and back) with the ties-first pin (or clip) the center of the tie to the center of the neckline.

To be sure that everything that is gathered, and a bit bulky will be safely placed inside the tie and centered nicely to the tie, you can eventually pin and stitch the gathered neckline to the
bottom part of the opened tie (that seam will be visible only on the wrong side of the dress-inside), just as picture beside is showing.
Gathering "density" will determine how the necklines will be: more open or more closed and it's suggested that you decide that by measuring yourself (from armpit to armpit + allowing how many inches more you would prefer it to be open)


10. Leave the back gathered neckline to be a bit longer than the one on the front, as it will allow more exposed back. Of course, if you don't like the back to be exposed, finish the back neckline like the front one-gather it with same "density".
My front neckline is 13" and 23" on the back.


11. Sew the ties in place, Starting from one end of the tie, going to it's opposite end, making sure that each tie is centered nicely on the dress-front and back.


12. Make the knots on the ties ends and trim them.


It's finished - just tie the dress the way you prefer and you are ready to rock!!!


xx
Katarina

Friday 26 July 2019

Origami 3D pinwheel quilt block tutorial




Hi there!
Every new fabric collection I create, makes me think about the projects that would be most suitable to show off my intentions, to gather the inspiration with the final products.
In a quilt-y way of thinking (thinking geometrical;), I wanted to create some blocks that would be easy to make and yet very joyful and summery.
And what better way, than doing the pinwheels, right?

Firstly, I wanted to make these fabric pinwheels.
But, then I realized that I would prefer having them as quilt blocks.


Pinwheel blocks are fun, but even better if they are uncommon and 3D!!!


So, I found several tutorials and videos by browsing the internet for these blocks, and at the end, I decided to gather here my step by step pics of creating these blocks, as they are easy and fun to make!

So, let's get started!

Tools/materials:

- sewing machine
- cutting mat
- scissors, rotary cutter
- rulers
- thread, needle (quality thread and needles)
- iron and ironing board
- pins and/or clips
- fabrics: 3 different prints, 1 fat quarter of each
- batting (cotton or cotton blend)

Prints I used are from my Floralish fabric collection for Art Gallery fabrics:

fabric A: FSH-27407  Citrus Tangerina
fabric B:  FSH-27402  Seed of Iris fabric C: FSH-27406  Dancing Fortunella


Prepare and cut the fabrics:

1. Cut all 3 prints in 5" x 5" squares, so that you have:

-16 (sixteen) 5" x 5" squares in fabric that will be the base for the pinwheels (fabric A)
-8 (eight) 5" x 5" squares in fabric that will be for the pinwheels (fabric B)
-8 (eight) 5" x 5" squares in fabric that will be for the pinwheels (fabric C)












2. With squares from the fabrics B and C make the Half Square Triangles (HSTs):

Place and align two squares of two different fabrics (fabric B and C) right sides together and with a marker or pencil draw a diagonal line across the wrong side of the fabric. Sew a 1/4" seam on both sides of the drawn line. Cut the unit in half along the drawn center line. Open and press the units with wrong sides facing inside, hiding seams inside.
In this way, you will obtain two HST’s from each unit and will have 16 folded triangles.













































3. Trim the folded triangles to 4", as shown in the picture, to get rid off the dog ears and get all nice and precise triangles.


*As you will obtain 4 pinwheel blocks that are double sided, at this point, you can choose if making them so that they have all the same fabric as main, or using both fabrics as main- so that you have 2 pinwheels in fabric B as main and 2 pinwheels in fabric C as main. Another thing that you can play with is the direction of the pinwheel: it can be in clockwise direction or counterclockwise direction.



4.  Place the folded triangles on the background squares, so that the folded diagonal of the triangle is parallel with the square's diagonal line. Pin or clip to obtain all 4 block units, so that they are forming the shape of the pinwheel. Secure the pinwheel triangles with stitches-using the narrow seam allowance ( a bit less than the 1/4"-approximately 1/8″ from the edge of the fabric ) the both sides where triangle is laying.  


5. Complete the steps until you have all 16 units completed and ready to assemble into a quilt blocks.
Take care that you are sewing each folded triangle in the same, desired direction.   




6. Sew the two and two units together of each block, using the 1/4" seam allowance ( so that your previous stitches are within the new stitched lines). The folded triangle areas are very bulky, so sew carefully. Finally, join the pairs together into a quilt block.



Press the units flat before opening to set each seam. Open each unit and with your iron press the seam allowance either open or to one side, upon your preferences. Pressing the seams open eliminates bulk and makes it easier to match the seams.  

Your blocks are finished and you can use them for any kind of quilty projects - from pillows and table runners to quilts, or eventually as detail for some kitchen accessories. 


I made the pillow with contrasting fabric piping ( from my Mediterraneo fabric collection) and loved it!!!!



Happy sewing!!!
Katarina

Thursday 25 July 2019

Floralish fabrics

3x6 banner

My newest collection, Floralish is finally out and is shipping to stores!
It was inspired by summer and is filled with delectable fruits and stunning flora, beautiful blossoms with a fusion of watercolor textures fused with fresh and sweet tones.

Here's my mood board for the collection ( all the pics are not mine, but are taken from Pinterest) and my color palette.








And here are the prints from the collection:














































I created a few things with these fun prints, and here's my favorite-Summer solstice quilt pattern:



I have the pattern available in my Etsy shop:

Summer solstice quilt pattern and to celebrate it,  I activated the coupon code: FLORALISH (30% off).




I hope that these prints will inspire you to create something bright and joyful for you and your loved ones!!!
Happy summer,
Katarina